Altigen MAXCS 7.0 Update 1 MultiVOIP Configuration Instrukcja Użytkownika Pobierz pdf (Strona 23)

MAXCS 7.0 Update 1MultiVoIP Configuration Guide Page 23 of 27

Verification

1. Follow Figure 3. Use extension 104 to dial 15102520004. The call should go through the MVP

gateway.

2. Use extension 104 to dial 14081231234. The call should go through local trunks instead of the

gateway.

Outgoing Call to PSTN Using Extension Dialed Digit Translator

Before you start these procedures, make sure you have met the requirements in the section

Requirements on page 3, and perform the steps in the sections SIP-Tie Trunk Configuration for Incoming

Calls from PSTN and SIP-Tie Trunk Configuration for Outgoing Call to PSTN. The steps in the section

Outgoing Calls to PSTN using Out Call Routing are optional. Analog extensions behind MVP410 are

optional. If analog extensions are required, also perform the steps in the section

SIP Extension

Configuration.

The MultiVoIP gateway is typically located in a remote branch office. When a user in the remote office

wants to make a trunk call, for voice quality purposes the remote user may always want the call go

through the MVP410 FXO ports. An administrator can configure “Extension Dialed Digit Translator” to

achieve this goal.

Please refer to Figure 3. When a remote user uses extension 251 or 210 to make a call to 15102520004,

MaxCS needs to translate the number to 8-1-222-2520004 (Refer to the section

SIP-Tie Trunk

Configuration for Outgoing Calls to PSTN for details).

(Ext 251 and ext 252 are optional if you only use AltiGen IP phone 210.)

To configure this digit translation, follow these steps:

1. Log into MaxCS Administrator and select System > System Configuration > Number Plan.

2. In the Dialed Digit Translator panel, check the Enable check box and click Setup.

1. In the Dialed Digit Translator window, from the Select Digit Translator list select Extension Dialed

Digit Translator.

2. Create a new Extension group named Area Code 510.

1 2 ... 18 19 20 21 22 23 24 25 26 27

Brak uwag

Altigen MAXCS 7.0 Update 1 MultiVOIP Configuration Instrukcja Użytkownika Strona 23